Download latest Firmware
Posted: Tue Oct 14, 2014 10:28 pm
THIS IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR AN ENTITY), THE END USER, AND NETONIX, LLC. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, DO NOT DOWNLOAD THE SOFTWARE FROM OUR WEB SITE AND DO NOT INSTALL THE SOFTWARE.
BY DOWNLOADING THE SOFTWARE ON THIS PAGE, YOU ARE AGREEING TO THE FOLLOWING:
1. Grant of License
Netonix, LLC grants to you a non-exclusive, non-transferable license, without right to sub-license, distribute or modify.
2. Title
The software is copyrighted by Netonix, LLC. Netonix, LLC retains all rights, title, and ownership of the software and all subsequent full or partial copies and derivatives of the Product, made by you or Netonix, LLC, including translations, compilations, partial copies, modifications, and updates. This license is not a sale of the software or any copy or derivative. You shall have no right to reproduce any full or partial copies of the software. You agree not to take any steps, such as reverse assembly or reverse compilation, to derive a source code equivalent of any software contained in the product.
3. Warranty Exclusion
YOU UNDERSTAND THAT THIS PRODUCT IS PROVIDED "AS IS". THERE ARE NO WARRANTIES UNDER THIS AGREEMENT, AND NETONIX, LLC DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE.[/size]
4. Limitation of Liability
IN NO EVENT SHALL NETONIX, LLC BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES PURSUANT TO THIS AGREEMENT.
5. Proprietary Rights Exclusion Netonix, LLC makes no representation or warranty that the Product, or products developed using the Product, do not infringe any proprietary rights of any third parties. You shall assume sole responsibility for any such infringement.
6. Indemnification
You hereby agree to indemnify, defend and hold Netonix, LLC harmless from and against any and all claims, actions, suits, liabilities, judgments, losses, damages, attorneys' fees and other expenses of every nature and character by reason of this Agreement or use by you of products utilizing the Product.
7. Export Restrictions
You shall not export, directly or indirectly, any Product or products developed using the Product to any country for which the laws of the United States or the regulations of any U.S. agency requires an export license or other governmental approval, without first obtaining such license or approval. You shall strictly comply with all such restrictions. You agree to indemnify and hold Netonix, LLC harmless against all losses, damages, penalties, or causes of action resulting from a violation of this Section.
8. U.S. Government Restricted Rights
This Product is provided with Restricted Rights. Use, duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause CA 252.227-7013 or sub-paragraphs (a) through (d) of the Commercial Computer Software -Restrictive Rights clause CA 52.227-19, as reserved under the copyright laws of the United States. Manufacturer is Netonix, LLC, 154 Earland Drive, Building 5C, New Holland, PA 17557
9. Governing Law
The validity, performance, construction and interpretation of this Agreement shall be governed by laws of the state of Pennsylvania, United States of America, excluding its conflicts of laws rules, as applied to agreements entered into in Pennsylvania between Pennsylvania residents.
NOTE: WE HAVE A NEW MIB AND OUR OWN ENTERPRISE NUMBER
CLICK HERE TO DOWNLOAD MIB
Netonix Private Enterprise Number (46242)
As always be careful to roll out new versions, upgrade switches that are easily accessible until you verify that the new firmware works with your network design and desired feature set. We try to test as much as possible but it is impossible to test every possible network configuration.
IF A SWITCH ARRIVED WITH 1.5.5 PRELOADED PLEASE CHECK THIS THREAD
IF YOU HAVE BRICKED SWITCH DUE TO 1.5.15 PLEASE SEE THIS THREAD
Latest WS Stable Release: v1.5.16
Click HERE to download firmware v1.5.16 - Released 5/16/2024
Click HERE to go to the thread for v1.5.16 Bug Reports and Comments.
FIXED/CHANGED
- Fixed SNMP init error (causing memory leaks)
- Fixed kernel page-cache failure
- Fixed watchdog memory leak
- Fixed leak in net-snmp causing "No MemShared" error in logs
- Fixed SFP port link flapping on config change
- Stability issue discovered from internal caching in vtss_appl fixed
- i2c corruption that bricked smart dc switches (only in 1.5.15)
- snmp corruption
ENHANCEMENTS
KNOWN ISSUES
- WEB UI issues when not at 100% Zoom on browser especially on VLAN TAB
- Some language templates need help
Released 5/16/2024
Latest WS Release Candidate: v1.5.17rcX
Click HERE to download firmware v1.5.17rcX - Released 8/9/2024
Click HERE to go to the thread for v1.5.17rc2 Bug Reports and Comments.
FIXED/CHANGED
- reduced attack surface on webserver - rc1
- upgrade failure on very old WS models. - rc1
- openssl upgraded - rc2
- lighttpd upgraded - rc2
- several packages patched for openssl upgrade -rc2
- frontend files now served with gzip'd encoding - rc2
ENHANCEMENTS
KNOWN ISSUES
- WEB UI issues when not at 100% Zoom on browser especially on VLAN TAB
- Some language templates need help
Released 8/9/2024
Latest WS3 Stable Release: v2.0.8
Click HERE to download firmware v2.0.8 - Released 3/11/2023
Click HERE to go to the thread for v2.0.8 Bug Reports and Comments.
FIXED/CHANGED
- Orphaned terminal sessions that would cause 100% CPU issue
- Issues with SFP+ configuration
- Memory leak that caused reboots
- Security Issues
- SNMP Issues
ENHANCEMENTS
- Added checks that config changes save correctly before applying
- Automatically reload UI if spurious error occurs
KNOWN ISSUES
- DO NOT USE DASHES IN SWICH NAME CAUSES ISSUES WHEN SAVE OF CONFIG
- STP / RSTP / MSTP is broken - DISABLE IT
- If you have an OCP on a port try using a different port see if bad port or problem follows the cable.
- Also another issue just discovered inserting some if not all 1G SFP modules causes a reboot
Inserting 10G SFP+ modules work fine.
Hoping to have a new release in a couple weeks.
- WEB UI issues when not at 100% Zoom on browser especially on VLAN TAB
- Some language templates need help
Released 12/5/2022
Latest WS3 Release Candidate: v2.0.9rc2
Click HERE to download firmware v2.0.9rc2 - Released 3/14/2024
Click HERE to go to the thread for v2.0.9rc2 Bug Reports and Comments.
FIXED/CHANGED
- Fixed undefined behavior caused by dash characters in switch name - rc1
- STP/RSTP/MSTP Roles now correctly displayed in web UI and CLI - rc2
- Fixed STP/RSTP/MSTP instability handling Multicast Frames - rc2
NOTE:
The fix for rc1 directly applies to changing the switch name to something like "switch-test-1", doing this caused severe delay's applying config's, switch lock-up, and unexpected behavior after reboots.
Due to the nature of the error, components of what was needed to fix this specific issue may have been responsible for other types of config changes causing similar error's. We will need feedback to verify if this is the case or not. During testing, we are now unable to replicate the behavior's described.
With any luck, this might solve the majority of stability issue's we're seeing on the WS3.
Some people have reported needing to default switch after upgrade to RC1. Probably more needed if you had a dash in the switch name.
Please let us know in the Bugs and Reports Thread what you find when trying this firmware.
ENHANCEMENTS
KNOWN ISSUES
- IPv6 has been disabled pending investigation
- IGMP Snooping has been found to cause instability with STP, it has been disabled pending investigation
- Also another issue just discovered inserting some if not all 1G SFP modules causes a reboot.
Inserting 10G SFP+ modules work fine. (Update on this topic, please see viewtopic.php?f=17&t=7902&start=10#p38311)
Hoping to have a new release in a couple weeks.
- WEB UI issues when not at 100% Zoom on browser especially on VLAN TAB
- Some language templates need help
Released 3/14/2024
Read down through this thread for firmware version details, newest versions are at the end.
BY DOWNLOADING THE SOFTWARE ON THIS PAGE, YOU ARE AGREEING TO THE FOLLOWING:
1. Grant of License
Netonix, LLC grants to you a non-exclusive, non-transferable license, without right to sub-license, distribute or modify.
2. Title
The software is copyrighted by Netonix, LLC. Netonix, LLC retains all rights, title, and ownership of the software and all subsequent full or partial copies and derivatives of the Product, made by you or Netonix, LLC, including translations, compilations, partial copies, modifications, and updates. This license is not a sale of the software or any copy or derivative. You shall have no right to reproduce any full or partial copies of the software. You agree not to take any steps, such as reverse assembly or reverse compilation, to derive a source code equivalent of any software contained in the product.
3. Warranty Exclusion
YOU UNDERSTAND THAT THIS PRODUCT IS PROVIDED "AS IS". THERE ARE NO WARRANTIES UNDER THIS AGREEMENT, AND NETONIX, LLC DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE.[/size]
4. Limitation of Liability
IN NO EVENT SHALL NETONIX, LLC BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES PURSUANT TO THIS AGREEMENT.
5. Proprietary Rights Exclusion Netonix, LLC makes no representation or warranty that the Product, or products developed using the Product, do not infringe any proprietary rights of any third parties. You shall assume sole responsibility for any such infringement.
6. Indemnification
You hereby agree to indemnify, defend and hold Netonix, LLC harmless from and against any and all claims, actions, suits, liabilities, judgments, losses, damages, attorneys' fees and other expenses of every nature and character by reason of this Agreement or use by you of products utilizing the Product.
7. Export Restrictions
You shall not export, directly or indirectly, any Product or products developed using the Product to any country for which the laws of the United States or the regulations of any U.S. agency requires an export license or other governmental approval, without first obtaining such license or approval. You shall strictly comply with all such restrictions. You agree to indemnify and hold Netonix, LLC harmless against all losses, damages, penalties, or causes of action resulting from a violation of this Section.
8. U.S. Government Restricted Rights
This Product is provided with Restricted Rights. Use, duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause CA 252.227-7013 or sub-paragraphs (a) through (d) of the Commercial Computer Software -Restrictive Rights clause CA 52.227-19, as reserved under the copyright laws of the United States. Manufacturer is Netonix, LLC, 154 Earland Drive, Building 5C, New Holland, PA 17557
9. Governing Law
The validity, performance, construction and interpretation of this Agreement shall be governed by laws of the state of Pennsylvania, United States of America, excluding its conflicts of laws rules, as applied to agreements entered into in Pennsylvania between Pennsylvania residents.
NOTE: WE HAVE A NEW MIB AND OUR OWN ENTERPRISE NUMBER
CLICK HERE TO DOWNLOAD MIB
Netonix Private Enterprise Number (46242)
As always be careful to roll out new versions, upgrade switches that are easily accessible until you verify that the new firmware works with your network design and desired feature set. We try to test as much as possible but it is impossible to test every possible network configuration.
IF A SWITCH ARRIVED WITH 1.5.5 PRELOADED PLEASE CHECK THIS THREAD
IF YOU HAVE BRICKED SWITCH DUE TO 1.5.15 PLEASE SEE THIS THREAD
Latest WS Stable Release: v1.5.16
Click HERE to download firmware v1.5.16 - Released 5/16/2024
Click HERE to go to the thread for v1.5.16 Bug Reports and Comments.
FIXED/CHANGED
- Fixed SNMP init error (causing memory leaks)
- Fixed kernel page-cache failure
- Fixed watchdog memory leak
- Fixed leak in net-snmp causing "No MemShared" error in logs
- Fixed SFP port link flapping on config change
- Stability issue discovered from internal caching in vtss_appl fixed
- i2c corruption that bricked smart dc switches (only in 1.5.15)
- snmp corruption
ENHANCEMENTS
KNOWN ISSUES
- WEB UI issues when not at 100% Zoom on browser especially on VLAN TAB
- Some language templates need help
Released 5/16/2024
Latest WS Release Candidate: v1.5.17rcX
Click HERE to download firmware v1.5.17rcX - Released 8/9/2024
Click HERE to go to the thread for v1.5.17rc2 Bug Reports and Comments.
FIXED/CHANGED
- reduced attack surface on webserver - rc1
- upgrade failure on very old WS models. - rc1
- openssl upgraded - rc2
- lighttpd upgraded - rc2
- several packages patched for openssl upgrade -rc2
- frontend files now served with gzip'd encoding - rc2
ENHANCEMENTS
KNOWN ISSUES
- WEB UI issues when not at 100% Zoom on browser especially on VLAN TAB
- Some language templates need help
Released 8/9/2024
Latest WS3 Stable Release: v2.0.8
Click HERE to download firmware v2.0.8 - Released 3/11/2023
Click HERE to go to the thread for v2.0.8 Bug Reports and Comments.
FIXED/CHANGED
- Orphaned terminal sessions that would cause 100% CPU issue
- Issues with SFP+ configuration
- Memory leak that caused reboots
- Security Issues
- SNMP Issues
ENHANCEMENTS
- Added checks that config changes save correctly before applying
- Automatically reload UI if spurious error occurs
KNOWN ISSUES
- DO NOT USE DASHES IN SWICH NAME CAUSES ISSUES WHEN SAVE OF CONFIG
- STP / RSTP / MSTP is broken - DISABLE IT
- If you have an OCP on a port try using a different port see if bad port or problem follows the cable.
- Also another issue just discovered inserting some if not all 1G SFP modules causes a reboot
Inserting 10G SFP+ modules work fine.
Hoping to have a new release in a couple weeks.
- WEB UI issues when not at 100% Zoom on browser especially on VLAN TAB
- Some language templates need help
Released 12/5/2022
Latest WS3 Release Candidate: v2.0.9rc2
Click HERE to download firmware v2.0.9rc2 - Released 3/14/2024
Click HERE to go to the thread for v2.0.9rc2 Bug Reports and Comments.
FIXED/CHANGED
- Fixed undefined behavior caused by dash characters in switch name - rc1
- STP/RSTP/MSTP Roles now correctly displayed in web UI and CLI - rc2
- Fixed STP/RSTP/MSTP instability handling Multicast Frames - rc2
NOTE:
The fix for rc1 directly applies to changing the switch name to something like "switch-test-1", doing this caused severe delay's applying config's, switch lock-up, and unexpected behavior after reboots.
Due to the nature of the error, components of what was needed to fix this specific issue may have been responsible for other types of config changes causing similar error's. We will need feedback to verify if this is the case or not. During testing, we are now unable to replicate the behavior's described.
With any luck, this might solve the majority of stability issue's we're seeing on the WS3.
Some people have reported needing to default switch after upgrade to RC1. Probably more needed if you had a dash in the switch name.
Please let us know in the Bugs and Reports Thread what you find when trying this firmware.
ENHANCEMENTS
KNOWN ISSUES
- IPv6 has been disabled pending investigation
- IGMP Snooping has been found to cause instability with STP, it has been disabled pending investigation
- Also another issue just discovered inserting some if not all 1G SFP modules causes a reboot.
Inserting 10G SFP+ modules work fine. (Update on this topic, please see viewtopic.php?f=17&t=7902&start=10#p38311)
Hoping to have a new release in a couple weeks.
- WEB UI issues when not at 100% Zoom on browser especially on VLAN TAB
- Some language templates need help
Released 3/14/2024
Read down through this thread for firmware version details, newest versions are at the end.