Possibly a bad switch?

DOWNLOAD THE LATEST FIRMWARE HERE
Post a reply
User avatar
mayheart
Experienced Member
 
Posts: 188
Joined: Thu Jan 15, 2015 1:42 pm
Location: Canada
Has thanked: 48 times
Been thanked: 58 times

Possibly a bad switch?

Fri Aug 05, 2016 5:51 am

I have a switch that says Error for wattage/temperature. This was running 1.3.7, upgrading it to 1.4.3rc4 has no effect.

There's no difference with the APs unplugged or not.

Screenshots attached

Image


Image
Top
User avatar
sirhc
Employee
Employee
 
Posts: 7604
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1674 times
Been thanked: 1358 times

Re: Possibly a bad switch?

Fri Aug 05, 2016 8:19 am

This normally happens when the switch takes damage and the current sensors are blown.

Since all the sensors use the same I2C bus if the switch took a bad enough hit it can take out the I2C bus and all the sensors report error like that.

Could be a failure or could be damaged wither way we can repair it.

If it is a failure the repair is free if it is damaged we charge a fee to replaced the board.

Here is where you get RMA instructions: viewtopic.php?f=6&t=1259


Here are some good posts on grounding:
viewtopic.php?f=30&t=1816
viewtopic.php?f=30&t=188
viewtopic.php?f=30&t=1429
viewtopic.php?f=17&t=1786&start=30#p13447
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Top
Post a reply
Return to Hardware and software issues

Who is online

Users browsing this forum: No registered users and 21 guests