josh wrote:cats and dogs living together...
Status Page Weirdness
-
lligetfa - Associate
- Posts: 1191
- Joined: Sun Aug 03, 2014 12:12 pm
- Location: Fort Frances Ont. Canada
- Has thanked: 306 times
- Been thanked: 381 times
Re: Status Page Weirdness
Refreshing honesty, I like that.
- Attachments
-
- Selection_001.jpg (479.93 KiB) Viewed 5052 times
-
sirhc - Employee
- Posts: 7398
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1604 times
- Been thanked: 1322 times
POSSIBLY GOOD NEWS
Dave spent some time looking at the issue and possibly came up with a software fix for SFP modules that use DOM or DDM unfortunately Eric has left the building for the night so I will not have a firmware to test and see until tomorrow.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
adairw - Associate
- Posts: 465
- Joined: Wed Nov 05, 2014 11:47 pm
- Location: Amarillo, TX
- Has thanked: 98 times
- Been thanked: 132 times
Re: Status Page Weirdness
Awesome, that's good to hear. I ordered a selection of SFP's today. Two different copper SFP's and two different MM SFP's.
Will report on them when they show up.
Good work guys.
Will report on them when they show up.
Good work guys.
-
sirhc - Employee
- Posts: 7398
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1604 times
- Been thanked: 1322 times
POSSIBLE FIX
There is a new v1.0.5rc2 firmware that we hope resolves this, please report back what you find!
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
adairw - Associate
- Posts: 465
- Joined: Wed Nov 05, 2014 11:47 pm
- Location: Amarillo, TX
- Has thanked: 98 times
- Been thanked: 132 times
Re: Status Page Weirdness
I just loaded 1.0.5.rc2 on the switch and will try the SFP's I have when I am at the data center next time. Will give a full report then.
This is supposed to fix the wattage and voltage readings?
I'll also test the ability to link up over the fiber.
This is supposed to fix the wattage and voltage readings?
I'll also test the ability to link up over the fiber.
-
adairw - Associate
- Posts: 465
- Joined: Wed Nov 05, 2014 11:47 pm
- Location: Amarillo, TX
- Has thanked: 98 times
- Been thanked: 132 times
Re: Status Page Weirdness
OK, with the above mentioned SFP's, any of them can be plugged in to the WS and it now shows the correct voltage and wattage. However, the MM (no SM patch cable yet) still wont link up with any of my mikrotiks. As before the WS shows a link light on the SFP port but the tik does not.
When I plugged the patch cable between the two SFP's on the same switch (which created a loop obviously) both port came up and showed link and flashed like they were passing traffic. So not sure what's up when I go to the tik. Tik to tik works, but not WS to tik. and now WS to WS works.. *shrug*
good work on fixing the reading on the status page tho.
When I plugged the patch cable between the two SFP's on the same switch (which created a loop obviously) both port came up and showed link and flashed like they were passing traffic. So not sure what's up when I go to the tik. Tik to tik works, but not WS to tik. and now WS to WS works.. *shrug*
good work on fixing the reading on the status page tho.
Who is online
Users browsing this forum: No registered users and 17 guests