we have the same Problem with segmenation fault..we have done no import from old switch..
it happens to 2 new switch
WS-10-250 AC
WS-12-400 AC
Firmware was 1.4.6
WS-12-250-DC Segmentation fault
- dgerlach@disquom.de
- Member
- Posts: 29
- Joined: Mon Oct 19, 2015 9:00 am
- Has thanked: 0 time
- Been thanked: 2 times
- Julian
Re: WS-12-250-DC Segmentation fault
Try holding the default button down when powering on the switch - for reasons gone into elsewhere on this forum, segmentation faults are known to happen, and this course of action usually sets things right.
-
sirhc - Employee
- Posts: 7348
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1597 times
- Been thanked: 1318 times
Re: WS-12-250-DC Segmentation fault
If that fails you can try this firmware recovery
viewtopic.php?f=17&t=1073#p8073
viewtopic.php?f=17&t=1073#p8073
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- dgerlach@disquom.de
- Member
- Posts: 29
- Joined: Mon Oct 19, 2015 9:00 am
- Has thanked: 0 time
- Been thanked: 2 times
Re: WS-12-250-DC Segmentation fault
The problem arose after we were testing LAG on. For this we had to test the cables back and forth and suddenly the one was no longer reachable and the next day we tested further and the other was no longer accessible..
-
sirhc - Employee
- Posts: 7348
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1597 times
- Been thanked: 1318 times
Re: WS-12-250-DC Segmentation fault
OK I am getting confused. You reported a segmentation fault and Julian and I expressed 2 options to recover the units.
Have you tried both methods?
Have you tried both methods?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- dgerlach@disquom.de
- Member
- Posts: 29
- Joined: Mon Oct 19, 2015 9:00 am
- Has thanked: 0 time
- Been thanked: 2 times
Re: WS-12-250-DC Segmentation fault
yes after Hardware reset it works again
Who is online
Users browsing this forum: No registered users and 57 guests