Hi Everybody,
I've had a WS-12-250-DC running at home for almost 10 years, it's been giving exceptional service.
Recently I've been noticing that the fan is running at full speed and there was an error appearing in the log;
eg. Nov 19 09:00:02 switch[827]: Warning: expected 1 fans but found 0
I replaced the fan with a new 24V Sunon fan but the fault is not resolved. The fan is still running at full speed. I can confirm that the fan speed tach signal is visible on the yellow wire of the fan.
It would appear that something else has failed on my switch. Normally I wouldn't be too concerned as long as the fan was running, but these small fans really scream when they are running at top speed.
Has anyone else come across a fan fail fault like this?
Michael.
Fan not detected, but it's working
-
lunokhod - Member
- Posts: 6
- Joined: Wed Feb 03, 2016 1:53 am
- Location: Australia
- Has thanked: 0 time
- Been thanked: 0 time
-
sirhc - Employee
- Posts: 7631
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1680 times
- Been thanked: 1361 times
Re: Fan not detected, but it's working
rma.netonix.com
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
lunokhod - Member
- Posts: 6
- Joined: Wed Feb 03, 2016 1:53 am
- Location: Australia
- Has thanked: 0 time
- Been thanked: 0 time
Re: Fan not detected, but it's working
sirhc wrote:rma.netonix.com
Thank you for the quick reply.
I'm worried that the expense of an out-of-warranty repair plus shipping Australia-USA-Australia (not to mention the additional headaches in doing the customs paperwork) would potentially cost more than a new replacement unit.
Michael.
-
sirhc - Employee
- Posts: 7631
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1680 times
- Been thanked: 1361 times
Re: Fan not detected, but it's working
Could try swapping fan from other unit if you have one or buy replacement fan or even clean connectors.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Re: Fan not detected, but it's working
lunokhod wrote:sirhc wrote:rma.netonix.com
Thank you for the quick reply.
I'm worried that the expense of an out-of-warranty repair plus shipping Australia-USA-Australia (not to mention the additional headaches in doing the customs paperwork) would potentially cost more than a new replacement unit.
Michael.
Michael, hello from the RMA desk.
This isn't a major repair, but does require smd soldering tiny parts; even if it were a major issue, and I did need to put an entirely new board in, you'd still be pleasantly surprised how the economics work out.
I agree the HTS system as currently implemented is draconian and arcane, but there's no legal basis for any involved government to collect or assess a tariff on this shipment as long as we fill out the paperwork properly.
do please reach out, I'm rma@netonix.com - happy to help
5 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 19 guests