v1.5.25 Bug Reports and Comments
-
robgnet - Member
- Posts: 12
- Joined: Mon Dec 22, 2014 7:31 pm
- Has thanked: 0 time
- Been thanked: 0 time
Re: v1.5.25 Bug Reports and Comments
Sorry, posted in wrong place, However updated from 1.5.16 to 1.5.24, now I get invalid fields, I see that MAC-Aging-Time has no value. I tried to put in a match from another switch of 300, but doesn't seem to take the input, and then just says Invalid Fields.
-
Dawizman - Experienced Member
- Posts: 151
- Joined: Fri Jul 03, 2015 4:11 pm
- Location: Cold Lake, AB - CANADA
- Has thanked: 17 times
- Been thanked: 23 times
Re: v1.5.25 Bug Reports and Comments
sirhc wrote:Once you disable enable it works fine?
What's you polling interval.
What SNMP software you using?
Yes, disabling / re-enabling after the update brought it back.
3 minute interval, PRTG.
Re: v1.5.25 Bug Reports and Comments
robgnet wrote:Sorry, posted in wrong place, However updated from 1.5.16 to 1.5.24, now I get invalid fields, I see that MAC-Aging-Time has no value. I tried to put in a match from another switch of 300, but doesn't seem to take the input, and then just says Invalid Fields.
I had the same problem after upgrading. I then did a "Default" from the Utilities menu, and then the MAC aging field was filled out with a value of 300 and I was able to apply config changes successfully from the UI.
- HamRadio
- Member
- Posts: 1
- Joined: Sat Jul 06, 2019 7:45 pm
- Has thanked: 0 time
- Been thanked: 0 time
Re: v1.5.25 Bug Reports and Comments
Been watching the forums pretty closely for awhile. Looks like the firmware has stabilized pretty good since 1.5.17. I've upgraded a couple switches from 1.5.12 to 1.5.25... went pretty good, they came back up just fine. I've got 100+ vlans on my switches. If all goes well, in a couple weeks I'll deploy 1.5.25 on the other 70 switches I have deployed. Unless someone tells me 1.5.26 is right around the corner.
- Accel Wireless
- Member
- Posts: 21
- Joined: Sat Jul 01, 2017 12:56 am
- Has thanked: 0 time
- Been thanked: 0 time
Re: v1.5.25 Bug Reports and Comments
Recently upgraded from 1.5.2 to this latest version and it seems to work fine but then all out of no where it kicks us out of the gui and we cant log in it will say tryign to re-establish connection and sometimes gives us the login page but wont accept anything? We can log in via CLI/ssh and access everything just fine. One 8 port DC switch is at a tower the other one a 12 port dc switch is here in the office waiting to be deployed with the same issue.
If we log in via CLI and do a cold reboot, it seems to fixe the issue for a time but then some random time later we cant log back into the gui again.
Any help or suggestions is appreciated.
Thanks
If we log in via CLI and do a cold reboot, it seems to fixe the issue for a time but then some random time later we cant log back into the gui again.
Any help or suggestions is appreciated.
Thanks
Re: v1.5.25 Bug Reports and Comments
Accel Wireless wrote:Recently upgraded from 1.5.2 to this latest version and it seems to work fine but then all out of no where it kicks us out of the gui and we cant log in it will say tryign to re-establish connection and sometimes gives us the login page but wont accept anything? We can log in via CLI/ssh and access everything just fine. One 8 port DC switch is at a tower the other one a 12 port dc switch is here in the office waiting to be deployed with the same issue.
If we log in via CLI and do a cold reboot, it seems to fixe the issue for a time but then some random time later we cant log back into the gui again.
Any help or suggestions is appreciated.
Thanks
Possible web caching issue, would recommend trying a different web browser, or resetting your web cache when this occurs to check that, I've had 12 port switch port layout/ imagery show up when logging into a 24 port switch before, more typical when doing a swapout for more ports and newer FW, where they are both set to the same static IP address but are on different FWs the old one would still be cached but allow me to log in, was super wack. But have had it happen when upgrading from older fw to newer ones but rare, id say a pre 1.5.6 upgrading to anything newer would cause it but thats off memory.
-
sirhc - Employee
- Posts: 7548
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1663 times
- Been thanked: 1341 times
Re: v1.5.25 Bug Reports and Comments
Accel Wireless wrote:Recently upgraded from 1.5.2 to this latest version and it seems to work fine but then all out of no where it kicks us out of the gui and we cant log in it will say tryign to re-establish connection and sometimes gives us the login page but wont accept anything? We can log in via CLI/ssh and access everything just fine. One 8 port DC switch is at a tower the other one a 12 port dc switch is here in the office waiting to be deployed with the same issue.
If we log in via CLI and do a cold reboot, it seems to fixe the issue for a time but then some random time later we cant log back into the gui again.
Any help or suggestions is appreciated.
Thanks
When you say latest version I assume you are referring to v1.5.25, if not then go to v1.5.25.
I am not sure what your problem is. I am not experiencing it nor have many people reported it. Could be a corrupted config?
You could try logging in and changing user name and password save and apply.
Then change it back to what you had and save and apply.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- CrackerRiley
- Member
- Posts: 8
- Joined: Fri Apr 08, 2016 4:55 pm
- Has thanked: 0 time
- Been thanked: 1 time
Re: v1.5.25 Bug Reports and Comments
Looks like radius authentication isn't working for me on 1.5.25. Worked on a switch with 1.5.14, upgraded it to 1.5.25 and it stopped working. Just says "Invalid username or password"
freeRadius server doesn't throw any errors when running debugger.
freeRadius server doesn't throw any errors when running debugger.
Who is online
Users browsing this forum: Bing [Bot] and 6 guests