Just so you are aware, the hacker put up a new page on the hack, asking Netonix if they want to pay to fix this problem, there is a link below the message to contact them.
I would think that now makes it officially ransomware, and extortion ! Time to call the FBI on this.
v1.5.17rcX Bug Reports and Comments
- phongc@smwd.com
- Member
- Posts: 6
- Joined: Tue Sep 13, 2016 5:42 pm
- Has thanked: 3 times
- Been thanked: 0 time
Re: v1.5.17rcX Bug Reports and Comments
I think there is a bug with MAC table. I cannot see mac address tied to the port anymore. I was running version 1.5.12 and updated to the latest version 1.5.17rc2 recently. I was running version 1.5.12 for a long time before this upgrade and the mac table has always worked. Could you add this to the fix for the next release.
-
Stephen - Employee
- Posts: 1061
- Joined: Sun Dec 24, 2017 8:56 pm
- Has thanked: 90 times
- Been thanked: 192 times
Re: v1.5.17rcX Bug Reports and Comments
This version had the mac table reduced in size due to spacing required for security related upgrades.
However, we have a new version in progress that will fix this.
However, we have a new version in progress that will fix this.
- RTGLW
- Member
- Posts: 20
- Joined: Thu Jun 08, 2023 7:25 pm
- Location: New Zealand
- Has thanked: 20 times
- Been thanked: 10 times
Re: v1.5.17rcX Bug Reports and Comments
Hi team,
Our production 1.5.17rc2 test unit appears to be showing the same SNMP related memory leak issue that we saw in 1.5.14, which was successfully resolved in subsequent 1.5.15rc2 and rc3 releases.
Memory utilization on our test host was stable until upgrading from 1.5.15rc3 to 1.5.17rc2, where we can see consistent memory loss. None of the switch's configuration was changed other than the firmware version. Toggling the SNMP server off and back on frees up that memory again as it had done in 1.5.14, as shown below;
1.5.17rc2 test unit memory graph
Our production 1.5.17rc2 test unit appears to be showing the same SNMP related memory leak issue that we saw in 1.5.14, which was successfully resolved in subsequent 1.5.15rc2 and rc3 releases.
Memory utilization on our test host was stable until upgrading from 1.5.15rc3 to 1.5.17rc2, where we can see consistent memory loss. None of the switch's configuration was changed other than the firmware version. Toggling the SNMP server off and back on frees up that memory again as it had done in 1.5.14, as shown below;
1.5.17rc2 test unit memory graph
-
Stephen - Employee
- Posts: 1061
- Joined: Sun Dec 24, 2017 8:56 pm
- Has thanked: 90 times
- Been thanked: 192 times
Re: v1.5.17rcX Bug Reports and Comments
RTGLW wrote:Hi team,
Our production 1.5.17rc2 test unit appears to be showing the same SNMP related memory leak issue that we saw in 1.5.14, which was successfully resolved in subsequent 1.5.15rc2 and rc3 releases.
Memory utilization on our test host was stable until upgrading from 1.5.15rc3 to 1.5.17rc2, where we can see consistent memory loss. None of the switch's configuration was changed other than the firmware version. Toggling the SNMP server off and back on frees up that memory again as it had done in 1.5.14, as shown below;
1.5.17rc2 test unit memory graph
Thanks for the information, we'll check this for the upcoming release.
Who is online
Users browsing this forum: Google [Bot], KBrownConsulting and 7 guests