SFP port flaps on any config change

DOWNLOAD THE LATEST FIRMWARE HERE
User avatar
mayheart
Experienced Member
 
Posts: 155
Joined: Thu Jan 15, 2015 1:42 pm
Location: Canada
Has thanked: 41 times
Been thanked: 37 times

SFP port flaps on any config change

Fri Nov 26, 2021 9:28 am

Hey there,

I've noticed this on a few switches running 1.5.9-RC1. This switch has spanning tree enabled, I've seen it happen on switches without spanning tree as well.

This is an example when I did a tag change and added a VLAN.

Code: Select all
Nov 25 16:04:39 UI: VLAN 991 PortSettings: changed from 'UEUUUUUEUUUUUUEEEEEEEEEEET' to 'UEUUUUUEUUUUEEEEEEEEEEEEET'
Nov 25 16:04:39 UI: VLANs: added 'OFFICE_MGMT'
Nov 25 16:04:49 STP: msti 0 set port 1 to discarding
Nov 25 16:04:49 STP: msti 0 set port 2 to discarding
Nov 25 16:04:49 STP: msti 0 set port 4 to discarding
Nov 25 16:04:49 STP: msti 0 set port 5 to discarding
Nov 25 16:04:49 STP: msti 0 set port 6 to discarding
Nov 25 16:04:49 STP: msti 0 set port 7 to discarding
Nov 25 16:04:49 STP: msti 0 set port 8 to discarding
Nov 25 16:04:49 STP: msti 0 set port 9 to discarding
Nov 25 16:04:49 STP: msti 0 set port 10 to discarding
Nov 25 16:04:49 STP: msti 0 set port 11 to discarding
Nov 25 16:04:49 STP: msti 0 set port 12 to discarding
Nov 25 16:04:49 STP: msti 0 set port 13 to discarding
Nov 25 16:04:49 STP: msti 0 set port 14 to discarding
Nov 25 16:04:50 STP: msti 0 set port 26 to discarding
Nov 25 16:04:52 STP: msti 0 set port 26 to learning
Nov 25 16:04:52 STP: msti 0 set port 26 to forwarding
Nov 25 16:04:52 STP: msti 0 set port 14 to learning
Nov 25 16:04:52 STP: msti 0 set port 14 to forwarding
Nov 25 16:04:52 STP: msti 0 set port 13 to learning
Nov 25 16:04:52 STP: msti 0 set port 13 to forwarding
Nov 25 16:04:52 STP: msti 0 set port 12 to learning
Nov 25 16:04:52 STP: msti 0 set port 12 to forwarding
Nov 25 16:04:52 STP: msti 0 set port 11 to learning
Nov 25 16:04:52 STP: msti 0 set port 11 to forwarding
Nov 25 16:04:52 STP: msti 0 set port 10 to learning
Nov 25 16:04:52 STP: msti 0 set port 10 to forwarding
Nov 25 16:04:52 STP: msti 0 set port 9 to learning
Nov 25 16:04:52 STP: msti 0 set port 9 to forwarding
Nov 25 16:04:52 STP: msti 0 set port 8 to learning
Nov 25 16:04:52 STP: msti 0 set port 8 to forwarding
Nov 25 16:04:52 STP: msti 0 set port 7 to learning
Nov 25 16:04:52 STP: msti 0 set port 7 to forwarding
Nov 25 16:04:52 STP: msti 0 set port 6 to learning
Nov 25 16:04:52 STP: msti 0 set port 6 to forwarding
Nov 25 16:04:52 STP: msti 0 set port 5 to learning
Nov 25 16:04:52 STP: msti 0 set port 5 to forwarding
Nov 25 16:04:52 STP: msti 0 set port 4 to learning
Nov 25 16:04:52 STP: msti 0 set port 4 to forwarding
Nov 25 16:04:52 STP: msti 0 set port 2 to learning
Nov 25 16:04:52 STP: msti 0 set port 2 to forwarding
Nov 25 16:04:52 STP: msti 0 set port 1 to learning
Nov 25 16:04:52 STP: msti 0 set port 1 to forwarding
Nov 25 16:04:56 Port: link state changed to 'down' on port 26
Nov 25 16:04:56 STP: msti 0 set port 26 to discarding
Nov 25 16:04:59 Port: link state changed to 'up' (1G) on port 26
Nov 25 16:04:59 STP: msti 0 set port 26 to discarding
Nov 25 16:05:02 STP: msti 0 set port 26 to learning
Nov 25 16:05:02 STP: msti 0 set port 26 to forwarding

User avatar
mayheart
Experienced Member
 
Posts: 155
Joined: Thu Jan 15, 2015 1:42 pm
Location: Canada
Has thanked: 41 times
Been thanked: 37 times

Re: SFP port flaps on any config change

Fri Nov 26, 2021 11:52 am

Another switch with spanning-tree disabled.

Code: Select all
Nov 26 09:47:59 UI: VLAN 32 ID: changed from '32' to '1000'
Nov 26 09:48:16 Port: link state changed to 'down' on port 26
Nov 26 09:48:19 Port: link state changed to 'up' (1G) on port 26


Discovery is also disabled on all the switches.

User avatar
mayheart
Experienced Member
 
Posts: 155
Joined: Thu Jan 15, 2015 1:42 pm
Location: Canada
Has thanked: 41 times
Been thanked: 37 times

Re: SFP port flaps on any config change

Fri Nov 26, 2021 2:55 pm

on a 12 port unit running 1.5.9-RC1...

Code: Select all
Nov 26 12:16:03 UI: VLANs: added 'test'
Nov 26 12:16:09 Port: link state changed to 'down' on port 13
Nov 26 12:16:09 STP: msti 0 set port 13 to discarding
Nov 26 12:16:10 Port: link state changed to 'up' (1G) on port 13
Nov 26 12:16:10 STP: msti 0 set port 13 to discarding
Nov 26 12:16:12 STP: msti 0 set port 13 to learning
Nov 26 12:16:12 STP: msti 0 set port 13 to forwarding

User avatar
mayheart
Experienced Member
 
Posts: 155
Joined: Thu Jan 15, 2015 1:42 pm
Location: Canada
Has thanked: 41 times
Been thanked: 37 times

Re: SFP port flaps on any config change

Fri Jan 07, 2022 12:11 pm

Any update on this?

I've had to downgrade to 1.5.5 to prevent this from happening.

User avatar
mayheart
Experienced Member
 
Posts: 155
Joined: Thu Jan 15, 2015 1:42 pm
Location: Canada
Has thanked: 41 times
Been thanked: 37 times

Re: SFP port flaps on any config change

Tue Feb 15, 2022 12:47 pm

Bump.

Any traction on this?

Doing a vlan change and causing a temporarily network outage while the SFP bounces is pretty serve.

As my previous post, it looks something changed after 1.5.5.

IntL-Daniel
Experienced Member
 
Posts: 170
Joined: Mon Nov 02, 2015 5:07 pm
Location: Czech Republic
Has thanked: 7 times
Been thanked: 9 times

Re: SFP port flaps on any config change

Tue Nov 15, 2022 7:58 am

And the same issue with any RSTP changes reported here. Any chance to fix at least this bug? Thanks!

User avatar
mhoppes
Associate
Associate
 
Posts: 658
Joined: Thu Apr 10, 2014 9:14 pm
Location: Pennsylvania
Has thanked: 10 times
Been thanked: 124 times

Re: SFP port flaps on any config change

Thu Jan 19, 2023 3:41 pm

We have stabilized on 1.5.5 as our stable release version for the time being -- that's how we've fixed this and many other issues.

User avatar
mayheart
Experienced Member
 
Posts: 155
Joined: Thu Jan 15, 2015 1:42 pm
Location: Canada
Has thanked: 41 times
Been thanked: 37 times

Re: SFP port flaps on any config change

Sun Jan 22, 2023 5:25 pm

Yeah, that was around the time I started noticing issues as well. Something changed in 1.5.6 and beyond.

Garnet
Member
 
Posts: 71
Joined: Wed Jun 02, 2021 9:29 am
Has thanked: 2 times
Been thanked: 1 time

Re: SFP port flaps on any config change

Mon Jul 10, 2023 7:10 pm

mhoppes wrote:We have stabilized on 1.5.5 as our stable release version for the time being -- that's how we've fixed this and many other issues.


Can you please share what other issues you've noticed on recent versions that reverting to 1.5.5. fixed? A link to the forum post would work as well.

Cheers,

User avatar
mayheart
Experienced Member
 
Posts: 155
Joined: Thu Jan 15, 2015 1:42 pm
Location: Canada
Has thanked: 41 times
Been thanked: 37 times

Re: SFP port flaps on any config change

Mon Jul 10, 2023 8:55 pm

Wow I reported this almost 2 years ago...

Will this ever get fixed?

Next
Return to Hardware and software issues

Who is online

Users browsing this forum: No registered users and 23 guests