Problem to power up

DOWNLOAD THE LATEST FIRMWARE HERE
muhammedmunas
Member
 
Posts: 2
Joined: Sun Nov 19, 2017 5:03 am
Has thanked: 0 time
Been thanked: 0 time

Problem to power up

Mon Nov 20, 2017 2:34 am

Netonix switch ( WS-8-150-DC ) has a problem to power up equipment using POE, when enabling the voltage weather 48volt or 24 it works only for few minutes then switches of equipment but when trying to use the with no POE its working properly.

How to solve this issues ? is it possible to solve remotely ?

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: Problem to power up

Mon Nov 20, 2017 8:28 am

Please provide some information.
Make sure your running v1.4.8

Describe how your powering the WS-8-150-DC

Describe your site.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

muhammedmunas
Member
 
Posts: 2
Joined: Sun Nov 19, 2017 5:03 am
Has thanked: 0 time
Been thanked: 0 time

Re: Problem to power up

Mon Nov 20, 2017 10:27 am

The site is a tower where we are co-siting for our radio network.
The site has AC power and solar which charges a battery bank. This battery bank has an output of 48volts which we tapped through to a circuit breaker then to our Netonix switch.

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: Problem to power up

Mon Nov 20, 2017 12:49 pm

muhammedmunas wrote:The site is a tower where we are co-siting for our radio network.
The site has AC power and solar which charges a battery bank. This battery bank has an output of 48volts which we tapped through to a circuit breaker then to our Netonix switch.


Questions:
1) Firmware version, if not v1.4.8 please upgrade

2) Is this a positive or negative DC site? (if this is negative 48V that is your problem)

You should bench test this unit as described in this post: viewtopic.php?f=6&t=2780#p19221
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

Return to Hardware and software issues

Who is online

Users browsing this forum: Yoan-MHz and 13 guests