I'm getting this error in the log on some of my switches. "Sep 9 13:44:24 switch[767]: 24V is out of range (22.8V)"
Why is this happen ? Is it a problem ? And if yes, how do I fix it ?
24V is out of range (22.8V)
-
sirhc - Employee
- Posts: 7347
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1597 times
- Been thanked: 1318 times
Re: 24V is out of range (22.8V)
Which model and what firmware version?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
jjonsson - Associate
- Posts: 337
- Joined: Wed Nov 05, 2014 12:30 pm
- Location: Denmark
- Has thanked: 37 times
- Been thanked: 65 times
Re: 24V is out of range (22.8V)
sirhc wrote:Which model and what firmware version?
WS-8-150-AC Board Rev. F. firmware v1.47
-
sirhc - Employee
- Posts: 7347
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1597 times
- Been thanked: 1318 times
Re: 24V is out of range (22.8V)
That could be a unit from the batch with a defective 3.3V CAP issue?
I would swap it out and either RMA it or get with Julian on a way to bench test the unit. If it is a defective CAP and you want to fix it yourself Julian will provide instructions.
Also I would always run the latest firmware which is v1.4.8rc11 as it has all bugs reported since v1.4.7 fixed.
I would swap it out and either RMA it or get with Julian on a way to bench test the unit. If it is a defective CAP and you want to fix it yourself Julian will provide instructions.
Also I would always run the latest firmware which is v1.4.8rc11 as it has all bugs reported since v1.4.7 fixed.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
jjonsson - Associate
- Posts: 337
- Joined: Wed Nov 05, 2014 12:30 pm
- Location: Denmark
- Has thanked: 37 times
- Been thanked: 65 times
Re: 24V is out of range (22.8V)
sirhc wrote:That could be a unit from the batch with a defective 3.3V CAP issue?
I would swap it out and either RMA it or get with Julian on a way to bench test the unit. If it is a defective CAP and you want to fix it yourself Julian will provide instructions.
Ok, I will let Allan and Julian have a look at it. I have a new one that is also reporting it. From same shipment :-(
By the way, Allan is working on how to unmount the ethernet plugs
sirhc wrote:Also I would always run the latest firmware which is v1.4.8rc11 as it has all bugs reported since v1.4.7 fixed.
I'm not a fan of RC firmware. I always wait for final version before upgrading....
5 posts
Page 1 of 1
Who is online
Users browsing this forum: Google [Bot], sirhc and 30 guests