v1.4.7 Bug reports and Comments

DOWNLOAD THE LATEST FIRMWARE HERE
User avatar
jonwang
Member
 
Posts: 17
Joined: Sat Jan 31, 2015 4:58 pm
Has thanked: 16 times
Been thanked: 1 time

Re: v1.4.7 Bug reports and Comments

Tue May 23, 2017 6:28 pm

Sounds good. I'll check those things and then find a place in the network that's easy to get to and try it out.

Thanks

clairelee
Member
 
Posts: 2
Joined: Tue Mar 07, 2017 9:04 am
Has thanked: 0 time
Been thanked: 0 time

Re: v1.4.7 Bug reports and Comments

Thu May 25, 2017 12:40 am

We encountered a very bizarre situation after an upgrade to 1.4.7. Web login no longer works. However, we can use the password to login via SSH. We have four WS-8-AC switches and only 1 of them has this issue.

- Keyboard is fine
- Password is definitely correct
- It worked on SSH but not HTTPS

Please advise.

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: v1.4.7 Bug reports and Comments

Thu May 25, 2017 12:59 am

clairelee wrote:We encountered a very bizarre situation after an upgrade to 1.4.7. Web login no longer works. However, we can use the password to login via SSH. We have four WS-8-AC switches and only 1 of them has this issue.

- Keyboard is fine
- Password is definitely correct
- It worked on SSH but not HTTPS

Please advise.


Did you read the release note before you upgraded or just upgraded? :ak:


viewtopic.php?f=17&t=2297&p=16689&hilit=+password+length#p16689

login to SSH and change the password in there and you "should" be fine
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

clairelee
Member
 
Posts: 2
Joined: Tue Mar 07, 2017 9:04 am
Has thanked: 0 time
Been thanked: 0 time

Re: v1.4.7 Bug reports and Comments

Thu May 25, 2017 2:51 pm

Sorry for that and thanks for your help. All good now.

dpwii
Member
 
Posts: 5
Joined: Wed Jul 12, 2017 8:54 pm
Has thanked: 0 time
Been thanked: 0 time

Re: v1.4.7 Bug reports and Comments

Wed Jul 12, 2017 10:06 pm

Here is my problem..

New WS-12-250-DC fresh out of the box.
I apply 12 volts and log in to the web GUI.
Everything is still at factory defaults.
I Upgrade from v1.4.2 to v1.4.7.
Everything progressed nicely and the last screen said the the GUI would refresh after the switch reboots.
I waited about 30 minutes, no refresh and now I can't get the switch to connect at all via HTTPS.
A cold boot made no difference
I can ping the switch at 192.168.1.20..
I can SSH into the switch and I get the password prompt, although admin and admin will not let me in.

What am I overlooking? :headb:
Any suggestions are welcome!

Julian
 

Re: v1.4.7 Bug reports and Comments

Thu Jul 13, 2017 7:19 am

try defaulting it - press and hold the button behind the pinhole on front of chassis to the right of the power LED, you should see a green LED crawl after so many seconds, and then a red LED crawl after a few more, release it after the red crawl is complete - your login woes should be solved, at least.

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: v1.4.7 Bug reports and Comments

Thu Jul 13, 2017 12:53 pm

I would try hitting REFRESH or restarting or using another browser as the pages caches and there are changes between versions.

Also clearing the cache.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

VMSystems
Member
 
Posts: 5
Joined: Wed Dec 28, 2016 9:27 pm
Has thanked: 0 time
Been thanked: 0 time

Re: v1.4.7 Bug reports and Comments

Sat Jul 22, 2017 12:43 am

For those of us that are new, how long should a firmware upgrade take?

I'm at 20 min on a mini6 going from 1.42 to 1.47. Port 1 has a light, but there are no pings etc. I saw the status move along and then it stopped at 8% after a few rounds up to 100% and a number of update lines in the web gui. No other ports (port2) will light up when plugged directly to a notebook. I did NOT unplug any hot ports for fear of causing damage and have not powered it down.

It is powered by PoE and is on the bench, so no biggy, I just hope it's not bricked. This is our first firmware upgrade.

User avatar
sirhc
Employee
Employee
 
Posts: 7347
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1597 times
Been thanked: 1317 times

Re: v1.4.7 Bug reports and Comments

Sat Jul 22, 2017 1:50 am

less than 5-6 minutes total
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

VMSystems
Member
 
Posts: 5
Joined: Wed Dec 28, 2016 9:27 pm
Has thanked: 0 time
Been thanked: 0 time

Re: v1.4.7 Bug reports and Comments

Sat Jul 22, 2017 2:01 pm

OK.. so now what? I've tried to reboot it with PoE and a barrel connector at 48V. I get one solid green light on port 1 regardless if anything is plugged in or not.

I've tried to hold down the reset button when powering it up and left it on for 10 min. Nothing changes, no blinking. Just the solid green on port 1. No other ports light up.

The unit has about 3 hours of bench testing on it. It lived and died on the bench... spent its whole life there and didn't get to see the real world. ***sniff***.

Is there a troubleshooting how-to somewhere or what options do we have?

PreviousNext
Return to Hardware and software issues

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 14 guests