Page 1 of 1

Using WS-12-DC to power ePMP 1000 Radio

Posted: Wed Jan 27, 2021 10:17 am
by evinmoh
Netonix switch POE not powering up a Non-GPS Sync ePMP 1000 connectorized Radio.

The switch currently powers other ePMP 1000 GPS connectorized radios at the site via it POE port

Anybody has an idea of how to make it work.

Can it work by using a crossover cable by swapping the pins 4 and 5 with 7 and 8?

Kindly assist

Re: Using WS-12-DC to power ePMP 1000 Radio

Posted: Wed Jan 27, 2021 11:25 am
by ahteran
Yes the netonix side is blue-white blue. brown-white brown at epmp 1000

Re: Using WS-12-DC to power ePMP 1000 Radio

Posted: Tue Mar 28, 2023 1:04 pm
by ewolff06
We use these to power radios with Canopy style wiring



https://www.tyconsystems.com/poe-xover-s