hard to believe...but...

Forum rules
THIS FORUM IS FOR PICTURES AND STORIES ONLY, PLEASE DO NOT POST QUESTIONS HERE!
User avatar
rebelwireless
Experienced Member
 
Posts: 607
Joined: Mon Sep 01, 2014 1:46 pm
Has thanked: 31 times
Been thanked: 136 times

hard to believe...but...

Thu Jan 28, 2016 5:42 pm

Another ToughSwitch gave up this 'mour'ning....

4:30AM, stopped passing packets.

This is a new, *almost* in production site. Replacing the routerboard with an RB850Gx2.
IMG_20160128_101937.jpg




Don't have the charge controller there yet, just the batteries. This site is a ~500ft DC run from reliable power. Using Landscape lighting cable to push a ~23.5V redundant supply of my own design down. Using Zener Diodes and 1Ohm resister to balance supplies, which accounts for the -.5V loss (which varies w/ load)
The WS-12-250-DC is telling me it's drawing ~36W with an input of 21.3V. So I'm losing a little over 2V across that 12 guage run, which lines up with the math's prediction pretty well. I Put a 100W load on this to test and it dropped to 18V.
IMG_20160128_111123.jpg


Went with the 12 port unit because this site will be loaded up with 3-4 back/sidehauls and 5 APs, and will likely be the test site for Mimosa PtMP 'A' APs for us.

Sites' load is the WS, an AF5X, RB951G, an RACl and a RAC-PtMP. There is another AF5X powered down for the link that will close the ring here on the next sunny day.

This is another Router-on-a still site. RB951G is powered off port 12 of the switch.

Return to WISP Switch™

Who is online

Users browsing this forum: No registered users and 8 guests