Page 4 of 4

Re: Strange behavior MINI

Posted: Wed Oct 03, 2018 10:42 am
by jma
We have tested this extensively now.
With a 1G Ethernet link on each port is the same as with four 1G connections and one 100Mbps connection: we have lockup several times a day. The switch then reboots automatically after being locked up between 10 and 20 minutes.
So after one day, we started with the cooling again.
With cooling it is a different story: In 7 days we have had only 2 incidents with locking up but each time the switch needed a reboot after more than 45 minutes because it didn't come back.
During lock up no leds are working. Switch is cool.


I have now ordered a WS-12-250 AC. Arrives next week. I hope this will solve our problems finally.

Re: Strange behavior MINI

Posted: Wed Oct 03, 2018 4:13 pm
by sirhc
Would be nice if you could RMA those units. You can send them via postal mail if you like as they are small

Re: Strange behavior MINI

Posted: Sun Oct 07, 2018 11:32 am
by jma
Hi Chris, problems are solved after putting 3 ports in 1G and 2 ports in 100M-F (and we kept cooling). Almost 4 days without any problem now.
As soon as we have received the 12 port switch I will send this MINI switch to you.

Re: Strange behavior MINI

Posted: Thu Nov 08, 2018 3:19 pm
by jma
Hi Chris, as mentioned in my previous post, we had no more problems with the MINI after putting 3 ports in 1G and 2 ports in 100M-F.
Not a single time in more than one month now.
Because the problems were completely solved we have not immediately replaced the MINI with the 12-port but today we did so.
Do you still want me to send you the MINI? Or is the information that I have given you enough?

Re: Strange behavior MINI

Posted: Thu Nov 08, 2018 4:31 pm
by sirhc
jma wrote:Hi Chris, as mentioned in my previous post, we had no more problems with the MINI after putting 3 ports in 1G and 2 ports in 100M-F.
Not a single time in more than one month now.
Because the problems were completely solved we have not immediately replaced the MINI with the 12-port but today we did so.
Do you still want me to send you the MINI? Or is the information that I have given you enough?


I would RMA it and have us repair it.

If it is the 3V CAP issue the repair is free.